Jahutusvedelik-MasterCoolant-LONGLIFE-punane-5l-MaterChem-1-1.jpg

Antifreeze MasterCoolant LONGLIFE – concentrate

Trade name: Antifreeze MasterCoolant LONGLIFE concentrate red

Ready-to-use coolant for vehicles is intended for use in all types of modern cooling systems, as specified by the vehicle manufacturer. Protects the cooling system at temperatures above -36 ° Conforms to next standards:

ASTM D3306, ASTM D4985, BS 6580 (2010), UNE 26361-88, NATO S759, Ford ESE M97B49-A, WSS-M97B44-D & ESD M97 B49-A, G13, VW TL 774-F, GM 6277M, Mercedes MB 325.3, DAF 74002, DD93K217, MAN 324 Typ SNF, GMW 3420, Volvo VCS 418-000, Scania TI 2-98 0813 TB, Wartsila 32-9011

PRODUCT DILUTION AND BOIL OVER PROTECTION RECOMMENDATIONS FOR HAVOLINE XTENDED LIFE ANTIFREEZE/COOLANT – CONCENTRATE

Freezing Protection, °F/°C
40% 2:3 (2 parts antifreeze/3 parts water)
50% 1:1 (1 part antifreeze/1 part water)
60% 3:2 (3 parts antifreeze/2 parts water)

-12/-24
-34/-36
-62/-52

Boiling Protection, °F/°C
(using a 15 lb pressure cap)
50% 1:1 (1 part antifreeze/1 part water)

265/129

Product Specification (TDS)

€0.00

Pieejamais apjoms

Clear

Quantity:

Description
Additional information

Product Description

Typical Key Figures

Test Method		Results
Concentration		50/50		100
Shelf life: 96 months from the date of antifreeze pouring into the containers indicated on the label.
Density 20°C, kg/l	ASTM D1122		1,068		1,113
Freezing point, °C	ASTM D3321		<-37		No
Boiling point, °C	ASTM D1120		108		180
рН at 20 °С, NUOM	ASTM D1287		8,6		8,7
Alkalinity margin, ml 1,0 Н HCl	ASTM D1121		3,0		6,0
ASTM D1384. Corrosion of metals (corrosion in glass) (1)
Copper, weight loss, mg/sample (2)	ASTM D1384		No		2 (10) (3)
Solder, weight loss, mg/sample (2)	ASTM D1384		No		0 (30) (3)
Brass, weight loss, mg/sample, (2)	ASTM D1384		No		2 (10) (3)
Steel, weight loss, mg/sample (2)	ASTM D1384		No		0 (10) (3)
Cast iron, weight loss, mg/sample (2)	ASTM D1384		No		-2 (10) (3)
Aluminium, weight loss, mg/sample (2)	ASTM D1384		No		5 (30) (3)
ASTM D4340. Corrosion on hot surface (4)
Aluminium, weight loss, mg/cm2/week (2)	ASTM D4340		No		<0,2 (1,0) (3)

Properties:
Colour: red
Product type: Ready for use
Country of origin: Estonia
Freezing point (°C): 50% in DI water: -36 °C
Boiling point (°C): 107 °C
Density relative at 20 (°C) g/cm3: 1,068 g / cm 3
Recommended storage temperature minimum: 0 C maximum: 30 C
pH (ASTM D-1119): 8,7
Shelf life 36 months.
Code Master EWS-100i2

H302 – Harmful if swallowed
H373 – May cause damage to organs through prolonged or repeated exposure (if swallowed)
P102: Keep out of the reach of children
P260: Do not breathe dust / fume / gas / mist / vapors / spray.
P264: Wash thoroughly after handling
P301 + P312: IF SWALLOWED: Call a POISON CENTER / doctor if you feel unwell.
P330: Rinse mouth
P501: Dispose of contents / container to site for specific waste collection
Does not damage rubber or plastic parts. Made by MasterChem.
COMPOSITION: ethylene glycol, water, additives.
MANUFACTURER: MASTERCHEM OÜ, Reg.nr 10755076 LAO 4, Maardu 74114 Estonia www.masterchem.ee Tel. +372 55513600